1.) Connect an analog phone to Line 1 of the SPA2102-R and dial * * * * Once an automated voice can be heard continue by dialing 723646# When prompted for the password dial 78778839# When prompted for the value dial 1# followed by another 1 to save. The web management interface should now be enabled.
2.) Navigate to http://192.168.1.1/admin/voice/advanced in a web browser , enter "admin" as the username and 7UprUtew as the password. *** If you do not receive a password prompt then replace 192.168.1.1 with 192.168.0.1. *** If you receive a password prompt but the above password does not work, it may be one of the following passwords:
io$c6%2
18
s.M
~~}G^
~~u*9 3.) The main configuration screen will now be displayed.
4.) From the menu select "System". Remove all values from the "Restricted Access Domains:" field. Ensure "Enable Web Admin Access:" is set to "yes". 5.) From the menu select "Provisioning". Set "Provision Enable:" to "no".
6.) Scroll to the bottom of the page and select the "Submit All Changes" button. 7.) From within the same browser window, navigate to http://192.168.1.1/admin/resync?http...om/$PN/$MA.cfg. 8.) Wait a few minutes and reboot your device.
Linear Mode
